3 FT SCSI 2 Cable - HD50 (MD50) M/M

NetConnex's quality 3 FT SCSI 2 Cable - HD50 (MD50) M/M Cables allow your SCSI devices to operate at their peak in performance. The 50-pin Micro-Density connector is used on peripheral devices such as scanners and external storage devices but is also found on the SCSI 2 host cards. Use these fast performing SCSI 2 cables to connect your peripherals either to a SCSI 2 host controller or to each other. SCSI cables are used for high speed data communications and are manufactured with twisted pair cables and a double shield to insure signal integrity. These SCSI 2 cables are made to the ANSI specifications with a typical impedance of 132 ohms.

• Three foot SCSI 2
• Male HD50 (MD50) to Male HD50 (MD50)
• Double shielded to insure signal integrity
• Designed for use with SCSI 2 peripherals such
  as scanners and external storage devices

Click Here for More Info

6 FT SCSI 1 Cable - Centronics 50 to Centronics 50

NetConnex's quality 6 FT SCSI 1 Cable - Centronics 50 to Centronics 50 Cables allow your SCSI devices to operate at their peak in performance. The 50-pin Centronics connector is most commonly used on peripheral devices but is also found on the oldest SCSI host cards. SCSI cables are used for high speed data communications and are manufactured with twisted pair cables and a double shield to insure signal integrity.

• Six foot SCSI-1
• Male Centronics 50 to Male Centronics 50
• Double shielded to insure signal integrity
• Designed for use with SCSI 1 peripherals such as some printers, scanners, and external storage devices

Click Here for More Info

3 FT SCSI 2 Cable - HD50 (MD50) to DB25 M/M

NetConnex's quality 3 FT SCSI 2 Cable - HD50 (MD50) to DB25 M/M Cables allow your SCSI devices to operate at their peak in performance. The 50-pin Micro-Density connector is used on peripheral devices such as scanners and external storage devices but is also found on the SCSI 2 host cards. Use these fast performing SCSI 2 cables to connect your peripherals either to a SCSI 2 host controller or to each other. SCSI cables are used for high speed data communications and are manufactured with twisted pair cables and a double shield to insure signal integrity. These SCSI 2 cables are made to the ANSI specifications with a typical impedance of 132 ohms.

• Three foot SCSI 2
• Male HD50 (MD50) to Male DB25
• Double shielded to insure signal integrity
• Designed to connect SCSI 1 DB25 peripherals such as scanners and external
  storage devices to the faster SCSI 2 host controller, or vice versa

Click Here for More Info

6 FT SCSI 1 Cable - Centronics 50 to DB25

NetConnex's quality 6 FT SCSI 1 Cable - Centronics 50 to DB25 Cables allow your SCSI devices to operate at their peak in performance. The 50-pin Centronics connector is  used on older peripheral devices but is also found on the oldest SCSI host cards. SCSI cables are used for high speed data communications and are manufactured with twisted pair cables and a double shield to insure signal integrity.

• Six foot SCSI-1 to DB25
• Male Centronics 50 to Male DB25
• Double shielded to insure signal integrity
• Designed to connect DB25 peripherals such as scanners and
      external storage devices to a SCSI 1 host controller

Click Here for More Info