2 FT CD-ROM to Sound Card Audio Cable - MPC-2 to MPC-2

Internal CD-ROM to Sound Card Audio cables from NetConnex are great for connecting your CD-ROM drive directly to your Sound Card, thereby bypassing processor usage. These quality MPC-2 to MPC-2 Audio cables allow for high fidelity sound transfer.

• 2 foot CD-ROM to Sound Card Audio Cable
• Connectors: Male MPC-2 to Male MPC-2
• Designed to connect an internal CD-ROM drive to a Sound Card

Click Here for More Info

.5 FT Internal Power "Y" Splitter

Internal Power Supply cables from NetConnex are great for supplying all of your internal devices with power from the power supply unit. These quality Male 5.25 to two Female 5.25 power cables are perfect for connecting a hard drive.

• 6 Inch Internal Power Supply "Y" Splitter Cable
• Connectors: Male 5.25 to two Female 5.25
• Designed to connect internal PC devices to a power supply

Click Here for More Info

2 FT Round Ultra ATA 133 E-IDE Cable - Black IDCx2

Our 2 FT Round Ultra ATA 133 E-IDE Cable - Black IDCx2 Round Ultra ATA133 EIDE Cables provide the performance you expect from your Ultra DMA IDE drives as well as a cleaner looking case with increased air circulation.  The Ultra DMA interface allows computers to read and write data faster reducing disk bottlenecks.  The 40-pin, 80-wire Ultra ATA133 cable has reduced interference which boosts signal integrity allowing for higher transmission rates.  By increasing air flow these cables also reduce over-heating and save internal space.  These Ultra ATA133 ribbon cables are compatible with Ultra 133/100 and Ultra 66 drives.  Plus they are backwards compatible with Ultra33 and just about all IDE/ATAPI devices.

• 2 foot 40-pin / 80-wire Ultra133 EIDE Cable
• Connectors: Female 40-pin IDS to 40-pin IDS
• Increases air flow reducing over-heating
• Designed for use with Ultra 133/100/66 devices such as hard drives, cd-rom drives, etc.

Click Here for More Info

1.5 FT Dual Drive IDE Cable - 40 Pin

NetConnex's Ultra33 IDE Ribbon Cables can be used to connect 2 IDE/ATAPI devices to your motherboard or host controller. 

• 1.5 foot 40-pin / 40-wire Ultra33 IDE Cable
• Connectors: Female 40-pin IDS to two 40-pin IDS
• Designed for use with IDE/ATAPI devices such as hard drives, cd-rom drives, etc.

Click Here for More Info