Booted CAT5e Custom Patch Cable - Gray - 19 FT

The NetConnex will keep you at the head of the pack with our high performance 350Mhz Cat5E custom patch cables. Category 5 Enhanced high speed cabling is a pre-requisite for today's performance demanding Ethernet and gigabit networks. NetConnex's Booted CAT5e Custom Patch Cable - Gray - 19 FT are well constructed using Enhanced Cat5e bulk cable, which consists of 4 unshielded twisted pairs, 24 AWG, stranded conductors, and a PVC jacket. NetConnex's Enhanced Cat5e custom 350Mhz patch cables easily handle bandwidth intensive applications and more. Our UL certified patch cables meet all the TIA/EIA standards. We terminate the non-booted Enhanced Cat5e cables with RJ45 plugs, which are staggered and are plated with 50 microns of gold plating per contact. We terminate the snag less booted Enhanced Cat5e cables with short body RJ45 plugs, which are plated with 50 microns of gold plating per contact. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. Our snag less boot prevents unwanted cable snags during installation/maintenance and provides extra strain-relief.

• Conductor: 4-pair 24 AWG Stranded Copper
• Connector: 50-micron gold plated RJ-45 Male to Male
• Jacket: PVC
• 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
• 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN
• 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM
• Voice
• Designed For: Network Interface Cards, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and all other twisted-pair applications
• Wired: TSB 568B (Standard US)
• Certifications: TIA/EIA; UL Listed

Click Here for More Info

CAT6 Certified Network Patch Cable - Gray - 26 FT

NOTE: Cannot Certify Cable Longer than 20 Meters (65 Ft). Our CAT6 Certified patch cables easily handle bandwidth intensive applications and more. NetConnex's CAT6 Certified Network Patch Cable - Gray - 26 FT are well constructed using Quabbin Cat6e cable, tested to 550 MHz and consisting of (4) 24 AWG stranded unshielded twisted pairs in a PVC jacket.  The cables are terminated using Stewart Cat 6 Patch cord compliant plugs featuring a patented load bar design, 50 microns of gold plating per contact and a Conductive NEXT Reduction System.  All Cables are constructed with color matched low profile slimline boots to provide a strain relief and help maintain a proper bend radius.
Each and every Certified Cat6 patch cord is labeled with its own unique serial number along with the date of manufacture.  All cords are packaged with their individual test results from our Fluke Networks DTX-1800 Tester.

Click Here for More Info

CAT5e Custom Patch Cable - Yellow - 27.5 FT

The NetConnex will keep you at the head of the pack with our high performance 350Mhz Cat5E custom patch cables. Category 5 Enhanced high speed cabling is a pre-requisite for today's performance demanding Ethernet and gigabit networks. NetConnex's CAT5e Custom Patch Cable - Yellow - 27.5 FT are well constructed using Enhanced Cat5e bulk cable, which consists of 4 unshielded twisted pairs, 24 AWG, stranded conductors, and a PVC jacket. NetConnex's Enhanced Cat5e custom 350Mhz patch cables easily handle bandwidth intensive applications and more. Our UL certified patch cables meet all the TIA/EIA standards. We terminate the non-booted Enhanced Cat5e cables with RJ45 plugs, which are staggered and are plated with 50 microns of gold plating per contact. We terminate the snag less booted Enhanced Cat5e cables with short body RJ45 plugs, which are plated with 50 microns of gold plating per contact. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. Our snag less boot prevents unwanted cable snags during installation/maintenance and provides extra strain-relief.

• Conductor: 4-pair 24 AWG Stranded Copper
• Connector: 50-micron gold plated RJ-45 Male to Male
• Jacket: PVC
• 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
• 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN
• 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM
• Voice
• Designed For: Network Interface Cards, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and all other twisted-pair applications
• Wired: TSB 568B (Standard US)
• Certifications: TIA/EIA; UL Listed

Click Here for More Info

CAT6 Certified Network Patch Cable - White - 20 FT

NOTE: Cannot Certify Cable Longer than 20 Meters (65 Ft). Our CAT6 Certified patch cables easily handle bandwidth intensive applications and more. NetConnex's CAT6 Certified Network Patch Cable - White - 20 FT are well constructed using Quabbin Cat6e cable, tested to 550 MHz and consisting of (4) 24 AWG stranded unshielded twisted pairs in a PVC jacket.  The cables are terminated using Stewart Cat 6 Patch cord compliant plugs featuring a patented load bar design, 50 microns of gold plating per contact and a Conductive NEXT Reduction System.  All Cables are constructed with color matched low profile slimline boots to provide a strain relief and help maintain a proper bend radius.
Each and every Certified Cat6 patch cord is labeled with its own unique serial number along with the date of manufacture.  All cords are packaged with their individual test results from our Fluke Networks DTX-1800 Tester.

Click Here for More Info