Home | Products | Search | Contact Us | About Us
NetConnex Computer Cable  
Adapters Connectors & Hardware
Audio / Video Cables
Audio / Video Switches
Bulk Cable
Clearance
Fiber Optic
Manufacturers
Networking
PC Cables
Main > Networking > Networking Tools



Crimp Tools

Insertion - Extraction Tools

Loopback Testers

Punch Down Tools

Screwdrivers

Strippers

Tone Generators

Tool Sets

9-LBS925
Serial Loop Back Tester - DB25 Female and DB9 Female
Serial Loop Back Tester - DB25 Female and DB9 Female

NetConnex's Serial Loop Back Tester - DB25 Female and DB9 Female. This Serial Loop Back Tester will provide you with the ability to diagnose any problems with your DB25 or DB9 Serial port or DB25 Serial cable. This Loop Back Tester consists of a DB25 Female end and a DB9 Female end for verifying accurate Serial port functioning.

  • Serial Loop Back Tester - DB25 and DB9
  • Connectors: Female DB25 and Female DB9
  • Fully Molded Construction
  • Used to verify working DB25 or DB9 Serial ports
  • Testing Software Not Included


Click Here for More Info
CR-90-807
6 Piece Plastic Insulated Slotted & Phillips Screw-driver Set
6 Piece Plastic Insulated Slotted & Phillips Screw-driver Set

6 Piece Plastic Insulated Slotted & Phillips Screw-driver Set from NetConnex. Contains: slotted: 1.0, 1.6, 2.4 and 3.0. phillips: 0 and 1



    Click Here for More Info
    CR-90-938
    17 Piece offset Ratchet & Socket Driver Set - American
    17 Piece offset Ratchet & Socket Driver Set - American

    17 Piece offset Ratchet & Socket Driver Set - American from NetConnex. Handy ratchet wrench with ten interchangeable tips or six sockets. Sockets are metric sizes. Sockets: 3/16, 7/32, 1/4, 5/16, 11/32, 3/8. Bits: 3 slotted, 4 phillips, 3 torx.



      Click Here for More Info
      GXN-PDT110
      GoldX Punch Down Tool - 110 Blade Included
      GoldX Punch Down Tool - 110 Blade Included

      Impact Punch Down Tool 24 Karat Quality Impact Punch Down Tool with 110 style blade. Using this tool will help you ensure that you have well seated connections on all industry standard 110 style IDC connectors.  The dual impact settings is helpful for when you find that the wire is just not seating right.  Standard blades are used in this tool, so if you damage or break the blade, or if you find that a job requires a Krone tool or 66 style block tool, just pick up a blade and use the same impact handle.  The blade which is included has both a punch only and a punch and cut side.   If you have need to punch without trimming any extra wiring, then use the punch only side.   If you want to punch and trim at the same time, then use the side that has "cut" stamped into it.

      • Sturdy handle
      • Blade included
      • Premium quality
      • Replaceable blade
      • Blade Storage in handle
      • Dual impact settings, low and high
      • For use with industry standard 110 connectors


      Click Here for More Info

      Home | Products | Contact Us | About Us
      Copyright © 2010 Netconnex Computer Cable, LLC 215.529.1560