|
|
Main > Manufacturers > Checkers Industrial Safety Products > LINEBACKER HD > 3 Channel
Description:
Protect valuable electrical cables, cords and hose lines from damage and abuse while ensuring a method of safe passage for vehicles and pedestrian traffic. Ideal for heavy trucks and forklifts in industrial environments, such as construction sites, where - Specifications (reference diagram)
- A LENGTH: 36 in. (914.4 mm)
- B WIDTH: 20 in. (508 mm)
- C HEIGHT: 3.05 in. (77.5 mm)
- D CHANNEL WIDTH: 2.25 in. (57.2 mm)
- E CHANNEL HEIGHT: 2.25 in. (57.2 mm)
- WEIGHT: 28 lbs. (12.7 kg)
- LOAD CAPACITY: 14,210 lbs/tire (28,420 lbs/axle)
- Protects cables and hose lines up to 2.25 in. in diameter.
- All weather polyurethane construction with heavy load capacity.
- Hinged lid makes placing and removing cables and hose lines easy.
- Patented 5-bar tread surface provides maximum traction.
- Heavy duty T-shaped connector interlocks modular sections.
- Lightweight and easy to transport, setup, disassemble and store.
- End caps provide gradual taper to ground or floor.
- Carrying handle is conveniently recessed on underside of protector.
- Safety warning symbols molded into lid surface.
- Protects valuable electrical cables and permits compliance with 2008 National Electrical Code requirements (Article 525) for minimizing the tripping hazard of electrical cables and cords at carnivals, fairs, amusement parks and similar events.
- Meets Americans with Disabilities Act guidelines for ADA accessibility.
- Ramp angle on 3 channel protectors is fairly steep. If forklifts or other vehicles with small wheels will be crossing these protectors, Cross-Guard ADA compliant ramps are highly recommended.
|
Description:
Protect valuable electrical cables, cords and hose lines from damage and abuse while ensuring a method of safe passage for vehicles and pedestrian traffic. Ideal for heavy trucks and forklifts in industrial environments, such as construction sites, where - Specifications (reference diagram)
- A LENGTH: Female: 8.25 in. (209.6 mm) Male: 6 in. (152.4 mm)
- B WIDTH: 20 in. (508 mm)
- C HEIGHT: 3.05 in. (77.5 mm)
- D CHANNEL WIDTH: 2.25 in. (57.2 mm)
- E CHANNEL HEIGHT: 2.25 in. (57.2 mm)
- WEIGHT: 8 lbs. (3.6 kg)
- LOAD CAPACITY: 14,210 lbs/tire (28,420 lbs/axle)
- Protects cables and hose lines up to 2.25 in. in diameter.
- All weather polyurethane construction with heavy load capacity.
- Hinged lid makes placing and removing cables and hose lines easy.
- Patented 5-bar tread surface provides maximum traction.
- Heavy duty T-shaped connector interlocks modular sections.
- Lightweight and easy to transport, setup, disassemble and store.
- End caps provide gradual taper to ground or floor.
- Carrying handle is conveniently recessed on underside of protector.
- Safety warning symbols molded into lid surface.
- Protects valuable electrical cables and permits compliance with 2008 National Electrical Code requirements (Article 525) for minimizing the tripping hazard of electrical cables and cords at carnivals, fairs, amusement parks and similar events.
- Meets Americans with Disabilities Act guidelines for ADA accessibility.
- Ramp angle on 3 channel protectors is fairly steep. If forklifts or other vehicles with small wheels will be crossing these protectors, Cross-Guard ADA compliant ramps are highly recommended.
|
Description:
Protect valuable electrical cables, cords and hose lines from damage and abuse while ensuring a method of safe passage for vehicles and pedestrian traffic. Ideal for heavy trucks and forklifts in industrial environments, such as construction sites, where - Specifications (reference diagram)
- A LENGTH: 25 in. (635 mm)
- B WIDTH: 20 in. (508 mm)
- C HEIGHT: 3.05 in. (77.5 mm)
- D CHANNEL WIDTH: 2.25 in. (57.2 mm)
- E CHANNEL HEIGHT: 2.25 in. (57.2 mm)
- WEIGHT: 15 lbs. (6.8 kg)
- LOAD CAPACITY: 14,210 lbs/tire (28,420 lbs/axle)
- Protects cables and hose lines up to 2.25 in. in diameter.
- All weather polyurethane construction with heavy load capacity.
- Hinged lid makes placing and removing cables and hose lines easy.
- Patented 5-bar tread surface provides maximum traction.
- Heavy duty T-shaped connector interlocks modular sections.
- Lightweight and easy to transport, setup, disassemble and store.
- End caps provide gradual taper to ground or floor.
- Carrying handle is conveniently recessed on underside of protector.
- Safety warning symbols molded into lid surface.
- Protects valuable electrical cables and permits compliance with 2008 National Electrical Code requirements (Article 525) for minimizing the tripping hazard of electrical cables and cords at carnivals, fairs, amusement parks and similar events.
- Meets Americans with Disabilities Act guidelines for ADA accessibility.
- Ramp angle on 3 channel protectors is fairly steep. If forklifts or other vehicles with small wheels will be crossing these protectors, Cross-Guard ADA compliant ramps are highly recommended.
|
Description:
Protect valuable electrical cables, cords and hose lines from damage and abuse while ensuring a method of safe passage for vehicles and pedestrian traffic. Ideal for heavy trucks and forklifts in industrial environments, such as construction sites, where - Specifications (reference diagram)
- A LENGTH: 25 in. (635 mm)
- B WIDTH: 20 in. (508 mm)
- C HEIGHT: 3.05 in. (77.5 mm)
- D CHANNEL WIDTH: 2.25 in. (57.2 mm)
- E CHANNEL HEIGHT: 2.25 in. (57.2 mm)
- WEIGHT: 15 lbs. (6.8 kg)
- LOAD CAPACITY: 14,210 lbs/tire (28,420 lbs/axle)
- Protects cables and hose lines up to 2.25 in. in diameter.
- All weather polyurethane construction with heavy load capacity.
- Hinged lid makes placing and removing cables and hose lines easy.
- Patented 5-bar tread surface provides maximum traction.
- Heavy duty T-shaped connector interlocks modular sections.
- Lightweight and easy to transport, setup, disassemble and store.
- End caps provide gradual taper to ground or floor.
- Carrying handle is conveniently recessed on underside of protector.
- Safety warning symbols molded into lid surface.
- Protects valuable electrical cables and permits compliance with 2008 National Electrical Code requirements (Article 525) for minimizing the tripping hazard of electrical cables and cords at carnivals, fairs, amusement parks and similar events.
- Meets Americans with Disabilities Act guidelines for ADA accessibility.
- Ramp angle on 3 channel protectors is fairly steep. If forklifts or other vehicles with small wheels will be crossing these protectors, Cross-Guard ADA compliant ramps are highly recommended.
|
| 1 |
|
|