|
|
Main > Networking > KVMs and Switch Boxes > IP Power Distribution > 8 Port
Description:
The PN0108 is a control unit that offers power management for up to eight directly connected devices (computers, hubs, routers, etc.). - Remote and local power on/off/reboot control for eight outlets via TCP/IP and a built in RS-232 PON (Power over the Net) port
- Daisy chain up to 15 additional stations to control up to 128 outlets
- Local / manual switching (with user restricted access) for each port via front panel push button switches
- Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
- Easy setup and operation via a GUI interface
- Provides three configuration/management methods: Browser; Telnet; or Console Terminal
- Safe shutdown and rebooting for Windows systems
- Over current protection and recovery for each AC port (110 V model only); total port over current protection (both models) - the current status can be monitored via the GUI interface locally or remotely.
- Independent circuits for unit power and device power - the PN0108 can be accessed if an over current condition trips the device side circuit breaker
- On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times
- Port grouping - perform the same action on a specified group of ports
- Two level (Administrator and User) security
- Firmware upgradeable - daisy chained stations receive the upgrade via the daisy chain bus
|
Description:
The PN9108U is a control unit that offers power management for up to eight directly connected devices (computers, hubs, routers, etc.). - Remote power on/off/reboot control for eight outlets via TCP/IP and a built in 10/100 Ethernet ports
- Daisy chain up to 15 additional stations to control up to 128 outlets
- Local / manual switching (with user restricted access) for each port via front panel push button switches
- Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order
- Easy setup and operation via a browser interface
- Safe shutdown and rebooting for Windows systems
- Over current protection and recovery for each AC port; total port over current protection - remote users can monitor the current status via the GUI on their browser
- Separate circuits for unit power and device power- the power control status menu is still accessible even when an over current condition trips the devices' circuit breaker.
- On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times
- Port grouping - perform the same action on a specified group of ports
- LEDs for easy status monitoring
- Two level (Administrator and User) security
- Detachable front panel for both convenient rack mounting and improved accessibility to the rear port connections
- Firmware upgradeable. Daisy chained stations automatically receive upgrades via the daisy chain bus
|
| 1 |
|
|