|
|
Main > Manufacturers > Energy Transformation Systems, Inc. > Ethernet Baluns & Panels > Pair Savers
Description:
Monoline Single Pair Balun - RJ45 pin 4 and 5 Jack to RJ45 Jack 10BaseT from NetConnex. The unique Monoline Baluns, only from ETS, allow you to reuse existing premise cabling the Ethernet 10BaseT networks. One single pair of UTP or STP replaces two pair UTP with improved NEXT (near end crosstalk) over the 802. - May use installed base of telco/Cat3 or better UTP
- The Cable Doubler allows 1 existing run to a workstation to support two connections without rewiring.
- Exceeds 802.3 10BaseT NEXT specification, isolating the reciever from the transmitted signal
- Run 100 meters (TIA568A) on high quality telco, Cat3 or better UTP
- Compact plastic case
- Made in USA. 100% QA.
|
Description:
Monoline Single Pair Balun - RJ11 pins 3 and 4 jack to RJ45 Jack - 10BaseT from NetConnex. The unique Monoline Baluns, only from ETS, allow you to reuse existing premise cabling the Ethernet 10BaseT networks. One single pair of UTP or STP replaces two pair UTP with improved NEXT (near end crosstalk) over the 802. - May use installed base of telco/Cat3 or better UTP
- The Cable Doubler allows 1 existing run to a workstation to support two connections without rewiring.
- Exceeds 802.3 10BaseT NEXT specification, isolating the reciever from the transmitted signal
- Run 100 meters (TIA568A) on high quality telco, Cat3 or better UTP
- Compact plastic case
- Made in USA. 100% QA.
|
Description:
Monoline Single Pair Balun - RJ45 3 cord pins 4 5 to RJ45 jack 10BaseT from NetConnex. The unique Monoline Baluns, only from ETS, allow you to reuse existing premise cabling the Ethernet 10BaseT networks. One single pair of UTP or STP replaces two pair UTP with improved NEXT (near end crosstalk) over the 802. - May use installed base of telco/Cat3 or better UTP
- The Cable Doubler allows 1 existing run to a workstation to support two connections without rewiring.
- Exceeds 802.3 10BaseT NEXT specification, isolating the reciever from the transmitted signal
- Run 100 meters (TIA568A) on high quality telco, Cat3 or better UTP
- Compact plastic case
- Made in USA. 100% QA.
|
Description:
Monoline Single Pair Balun - RJ11 3 cord pins 3 4 to RJ45 jack 10BaseT from NetConnex. The unique Monoline Baluns, only from ETS, allow you to reuse existing premise cabling the Ethernet 10BaseT networks. One single pair of UTP or STP replaces two pair UTP with improved NEXT (near end crosstalk) over the 802. - May use installed base of telco/Cat3 or better UTP
- The Cable Doubler allows 1 existing run to a workstation to support two connections without rewiring.
- Exceeds 802.3 10BaseT NEXT specification, isolating the reciever from the transmitted signal
- Run 100 meters (TIA568A) on high quality telco, Cat3 or better UTP
- Compact plastic case
- Made in USA. 100% QA.
|
Description:
Monoline Panel - Punchdown to RJ45 8 Port 1RU from NetConnex. The unique Monoline Baluns, only from ETS, allow you to reuse existing premise cabling for Ethernet 10BaseT networks. One run of Coax replaces two pair of UTP with improved NEXT (near end crosstalk) over the 802.3 specifica - May use pre-existing Star Cabling instead of 2 pair UTP cable
- Exceeds 802.3 10BaseT NEXT specification, isolating the reciever from the transmitted signal
- Run over 200 meters on coax (Exceeds TIA568A)
- Impedance matched
- Compact plastic case
- Made in USA. 100% QA. Specifications
- Insertion Loss < 0.5dB
- Connectors BNC (male or female) to RJ45 (plug or jack)
- Impedance 50/75/93 O to dual 100 O (two pair)
- Crosstalk > 30 dB
- Insertion Loss < 0.5 dB
- Connectors BNC (male or female) to RJ45 (plug or jack)
- Impedance 50/75/93 O to dual 100O (two pair)
- Crosstalk > 30 dB
- Dimensions 46mm x 25mm x 19mm - plug pigtails and cords as noted
|
| 1 2 3 |
|
|