Part #: MP0101U
Name: Matrix Plus USB Console Module

Where rack space us a premium, ATEN's MP Series (Zero-U KVM), allows multiple server connections via a linear Cat5 link.

• OSD provides a convenient tools for users to naviagte their desired ports.
• Allows a single USB KVM console to control a local computer and up to 62 additional computers by means of the daisy chaining to any type of computer - PC, Mac, or Sun
• Built in ASIC for greater reliability and compatibility
• Category 5 cable to chain to the KVM Modules
• High resolution video; up to 1280 x 1024 @ 60 Hz; 500 ft (max.)

Part #: CE300
Name: PS/2 KVM Console Extender w/ Audio and Mic Support

ATEN's CE300 KVM extender allows access to one computer system directly or multi-computer systems through a KVM switch from a remote console.

• Uses Cat 5 cable to connect the local and remote units(up to 330 ft. apart)- We strongly recommend that you use Cat 5 STP cable.
• Dual Console Operation-control your system form both the local and remote consoles (PS/2 keyboard, mouse, stereo speaker, stereo microphone and monitor).
• Supports stereo speaker and stereo microphone.
• Push button selection -sequential selection between local and auto mode.
• Automatic Gain Control-automatically adjusts signal strength to compensate for distance.
• High video resolution, up to 1280x1024.
• Supports DDC2B for local monitor (display data channel for communication between graphic card and monitor).
• Supports VGA,SVGA,and Multisync Monitors.
• Firmware upgradable.
• OS Compatibility:DOS, WIN98, WIN ME, WIN 2K, WIN 2003, WIN XP and LINUX.

Part #: CE750
Name: USB Console Extender with RS232 and audio

The CE750 USB Console Extender allows access to a computer or USB KVM from a remote console from up to 490 ft. away.

• Local and Remote Units connect with Cat5e cable
• Video Resolutions up to 1600 x 1200 @ 60 Hz (490 ft) or 1280 x 1024 @60 Hz (650 ft)
• Dual console operation – control your system from either the local or remote consoles
• Built-in ASIC for greater reliability and compatibility
• USB Keyboard and USB Mouse Ports
• RS-232 serial ports - allows connections to a serial terminal for configurations (Local Unit), or serial devices such as touch screens and barcode scanners (Remote Unit)
• Supports powered computer stereo speakers and microphones
• USB over current protection
• Pushbutton mode selection (Local Unit only) – selects Local (Remote lock out) or Auto operating modes.
• Built-in 8KV/15KV ESD protection (Contact voltage 8KV; Air voltage 15KV) and 2KV surge protection
• Adjustable gain control – manually adjusts signal strength fordistance compensation
• Supports VGA, SVGA, SXGA (1280 x 1024) and UXGA (1600 x 1200) and multi-sync monitors; local monitor supports DDC; DDC2; DDC2B
• Hot pluggable
• Rack mountable
• Easy to install – no software required – connecting cables to the devices is all it takes

Part #: CE790
Name: Digital USB Console Extender w/ Audio Support

The CE790 is an IP based KVM Extender with audio and RS-232 functionality.  It provides control of a computer system from a remote console ( keyboard, monitor, and mouse) located anywhere on your LAN.

• Single or multi point connections
• No video deterioration over distance
• No distance limitations
• Connects into your current network no extra cabling
• On Screen Display (OSD) simplifies set up and connecting receivers and transmitters
• Receivers and Transmitters are available as individual units
• The number of units that can be connected is limited to the number of IP Address available on your LAN.
• Industrial ethernet surge protectors prevent lightning and ground loop damage
• No software required.
• Dual console operation – control your system from both the transmitter and receiver USB keyboard, monitor, and mouse consoles
• High resolution video – up to 1920 x 1080
• Supports up to 30 Frames / sec
• Supports widescreen formats
• Ultra-high quality video mode

Part #: CE800B
Name: USB KVM Console Extender with USB Storage, Audio and Mic Support

The CE800 USB Console Extender allows access to a computer or USB KVM from a remote console from up to 820 ft. away.

• Cat 5 (or higher) cable to connect the Local and Remote Units – up to 820'(250m) apart
• Dual console operation - control your system(s) from either the local or remote console
• Pushbutton locks out the non-active console.
• Built-in USB port on both units supports external USB Mass Storage compliant flash drives for easy file sharing
• Special security feature requires login when mounting an external USB storage device on the remote unit
• The CE800 is configurable to your operating system Win, Mac, Sun, or SPC
• Supports VGA, SVGA, and Multi-sync monitors – the local unit supports DDC, DDC2, and DDC2B
• High Resolution Video – up to 1600 x 1200 @ 60 Hz
• Built-in 8KV ESD protection and 2KV surge protection
• Adjustable gain control – manually adjusts signal strength for distance compensation.
• Supports 2 speaker stereo systems and stereo microphone
• Supports the scrolling wheel on most mice
• Upgradeable firmware