Part #: IC485S
Name: RS-232 to RS-485/RS-422 Bidirectional Converter

The IC485S is hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four or two wire cable for full or half duplex, respectively.

• Data Transmission Controlled by the RTS Signal
• DCE/DTE Selectable
• Point to Point, Multidrop and Simplex/Duplex Link Selectable
• Four Wire Full Duplex / Two Wire Half Duplex
• Monitor Configuration Support
• Compact Size

Part #: IC485AI
Name: RS-232 to RS-422/RS485 Bi-directional Isolated Converter

ATEN's Isolated Converter (IC485AI) is a bi-directional converter that transparently converts RS-232 signals to RS-422/RS-485 signals (and vice versa), thus permitting the creation of reliable long distance communication systems using standard computer ha

• Automatic internal RS-485 bus supervision
• No external flow control signals for RS-485 required
• Transient suppression on RS-485 data lines
• Data transimission controlled by the RTS signal
• LEDs for easy status monitoring
• DCE/DTE selectable
• Point-to-point, multi drop, and simplex/duplex link selectable
• Four full duplex wires; two half duplex wires
• Supports up to 32 receivers to be set in multi drop installations
• Extends up to 4000 feet (1200 meters) through networking cables
• Supports transfer speeds of up to 115.2 Kbps
• Maximum 2000V Isolation Protection
• Compact size

Part #: IC108S
Name: RS-232 32bit 8-Port PCI Card

One 37pin (standard serial interface) to up to 8 DB9 or DB25 connectors Supports Windows 3.1/DOS, 98, ME, 2000, XP, and Linux Plug & Play Enabled 32-Byte FIFO Buffer UP to 921Kbps data transfer rate

Part #: IC164
Name: High Speed Parallel Line Extender

The parallel interface has a serious limitation in that data can only be transmitted reliably over relatively short distances.

• No External Power Required (External Power Optional)
• Can Be Used With Auto Switches
• Easy Installation
• Compact Size