6 FT SCSI 3 Cable - HD68 (MD68) to DB25 M/M

NetConnex's quality 6 FT SCSI 3 Cable - HD68 (MD68) to DB25 M/M Cables allow your SCSI devices to operate at their peak in performance. The 68-pin Micro-Density connector is used on peripheral devices such as scanners and external storage devices but is also found on the Ultra SCSI host cards. Use these fast performing SCSI 3 cables to connect your peripherals either to a SCSI 3 host controller or to each other. SCSI cables are used for high speed data communications and are manufactured with twisted pair cables and a double shield to insure signal integrity.

• Six foot Ultra SCSI 3
• Male HD68 (MD68) to Male DB25
• Double shielded to insure signal integrity
• Designed to connect DB25 peripherals such as scanners, and external storage devices to the fast Ultra SCSI 3 host controller

Click Here for More Info

6 FT SCSI 2 Cable - HD50 (MD50) to DB50 M/M

NetConnex's quality 6 FT SCSI 2 Cable - HD50 (MD50) to DB50 M/M Cables allow your SCSI devices to operate at their peak in performance. The 50-pin Micro-Density connector is used on peripheral devices such as scanners and external storage devices but is also found on the SCSI 2 host cards. Use these fast performing SCSI 2 cables to connect your peripherals either to a SCSI 2 host controller or to each other. SCSI cables are used for high speed data communications and are manufactured with twisted pair cables and a double shield to insure signal integrity. These SCSI 2 cables are made to the ANSI specifications with a typical impedance of 132 ohms.

• Six foot SCSI 2
• Male HD50 (MD50) to Male DB50
• Double shielded to insure signal integrity
• Designed to connect DB50 peripherals such as scanners and external storage devices to the fast SCSI 2 host controller

Click Here for More Info

3 FT SCSI 1 C50 to SCSI 2 HD50 (MD50) Cable

NetConnex's quality 3 FT SCSI 1 C50 to SCSI 2 HD50 (MD50) Cable allow your SCSI devices to operate at their peak in performance. The 50-pin Centronics connector is most commonly used on older peripheral devices but is also found on the oldest SCSI host cards. SCSI cables are used for high speed data communications and are manufactured with twisted pair cables and a double shield to insure signal integrity.

• Three foot SCSI 1 to SCSI 2
• Male Centronics 50 to Male HD50 (MD50)
• Double shielded to insure signal integrity
• Designed to connect SCSI 1 peripherals such as older printers, scanners, and external storage devices to newer, faster SCSI 2 host controllers

Click Here for More Info

15 FT IEEE 1284 Parallel Cable - DB25 M/M

NetConnex's IEEE 1284 Parallel Interface Cables are great for high speed bi-directional data communication between PC's and peripherals. These 15 FT IEEE 1284 Parallel Cable - DB25 M/M cables are manufactured with IEEE 1284 specialized cable which is 100% double shielded to insure signal integrity.

• Fifteen foot IEEE 1284 Parallel Interface Cable
• Connector Type: Male DB25 to Male DB25
• Double Shielded to prevent EMI/RFI interference
• Designed to connect Parallel peripherals to a PC

Click Here for More Info