CAT5e Custom Patch Cable - Purple - 50 FT

The NetConnex will keep you at the head of the pack with our high performance 350Mhz Cat5E custom patch cables. Category 5 Enhanced high speed cabling is a pre-requisite for today's performance demanding Ethernet and gigabit networks. NetConnex's CAT5e Custom Patch Cable - Purple - 50 FT are well constructed using Enhanced Cat5e bulk cable, which consists of 4 unshielded twisted pairs, 24 AWG, stranded conductors, and a PVC jacket. NetConnex's Enhanced Cat5e custom 350Mhz patch cables easily handle bandwidth intensive applications and more. Our UL certified patch cables meet all the TIA/EIA standards. We terminate the non-booted Enhanced Cat5e cables with RJ45 plugs, which are staggered and are plated with 50 microns of gold plating per contact. We terminate the snag less booted Enhanced Cat5e cables with short body RJ45 plugs, which are plated with 50 microns of gold plating per contact. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. Our snag less boot prevents unwanted cable snags during installation/maintenance and provides extra strain-relief.

• Conductor: 4-pair 24 AWG Stranded Copper
• Connector: 50-micron gold plated RJ-45 Male to Male
• Jacket: PVC
• 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
• 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN
• 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM
• Voice
• Designed For: Network Interface Cards, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and all other twisted-pair applications
• Wired: TSB 568B (Standard US)
• Certifications: TIA/EIA; UL Listed

Click Here for More Info

Booted CAT6 Custom Patch Cable - Gray - 96 FT

PLEASE NOTE: CUSTOM CABLES ARE NON-RETURNABLE
NetConnex's high speed Booted CAT6 Custom Patch Cable - Gray - 96 FT are well constructed using 250 MHz Cat6 bulk cable, which consists of 4 unshielded twisted pairs, 24 AWG, stranded conductors, and a PVC jacket plus they are UL certified. Our 250 MHz Cat6 custom patch cables easily handle bandwidth intensive applications and more. We terminate the snag less booted Cat6 patch cables with short body RJ45 plugs, which are plated with 50 microns of gold plating per contact. We terminate the non-booted Cat6 patch cables with RJ45 plugs, which are staggered and are plated with 50 microns of gold plating per contact. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum.

• Connector: 50-micron gold plated RJ-45 Male to Male
• Conductor: 24 AWG Stranded Copper
• Jacket: PVC
• Gigabit 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
• 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN
• 100 Mbps; 55/155 Mbps ATM
• High bandwidth applications
• Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications
• Certifications: UL Listed
• Standard: Category 6 TIA/EIA- 568-B

Click Here for More Info

Plenum DB15 Female to Female - Straight Wired Cable - 68 FT

This is a Custom Built Cable and is NON-RETURNABLE (3-5 Day Lead Time). NetConnex's Plenum DB15 Female to Female - Straight Wired Cable - 68 FT Plenum PC Joystick cables can be used with a PC's DB15 joystick port. Female to Female configurations will connect a joystick port with the appropriate switch box while a Female to Male will extend the existing cable. These Female DB15 to Female DB15 Plenum PC Joystick cables are manufactured with a Foil Shield to insure signal integrity.

• Connector Type: Female DB15 to Female DB15
• Foil Shielded to prevent EMI/RFI interference
• Designed to connect the DB15 Joystick port to a Joystick Switchbox

Click Here for More Info